SOLVED: Where can I get the diagram of the serpentine belt - Cars & Trucks (2024)

SOURCE: serpentine belt diagram:

if yours has the 3.8L then here is the diagram. Hope this helps
~ Zach

SOURCE: serpentine belt

This is a picture i drew in paint , for the 2001 honda passport belt wrap with a 3.2Liter V6, picture worth a thousand words.

SOURCE: i need a diagram of 1999 ford contour serpentine belt

Top one is for a 2.0, with AC, bottom one is the 2.5 with AC.

SOURCE: how do i change a serpentine belt for a 2007

Drive Belt: Service and Repair
DRIVE BELT

Components

REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY
2. REMOVE NO. 1 ENGINE UNDER COVER

3. REMOVE FAN AND GENERATOR V BELT
(a) While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and
then insert a bar of [diameter]5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.
HINT: The pulley bolt for the belt tensioner has a left-hand thread.
(b) Remove the V belt.

1. INSTALL FAN AND GENERATOR V BELT
(a) Set the V belt onto every part.
(b) While turning the belt tensioner counterclockwise, remove the pin.
NOTICE: Make sure that the V belt is properly set to each pulley.
(c) After installing the belt, check that it fits properly in the ribbed grooves.
HINT: Make sure to check by hand that the belt has not slipped out of the grooves on the bottom of the pulley.
2. INSTALL NO. 1 ENGINE UNDER COVER
3. INSTALL V-BANK COVER SUB-ASSEMBLY

SOURCE: 2007 chrysler sebring serpentine belt diagram

Go to; daycoproducts.com, click cars and trucks, then go to serpentine belt. Then on the right side of the screen click on finding your vehicle. Then get the illistration number and click on illistrations, go to that number it should something 6-? or 7-?. It's a pretty good websight.

Upload

Upload an image from your computer

Loading...

prevnext

0helpful

2answers

0helpful

1answer

0helpful

1answer

This should be located under the hood on a sticker with other engine information.

0helpful

1answer

No idea just get the new belt and play with it it will come to you in the end ,remember that the belt goes right around the alternator not just around the edge if you understand my drift

0helpful

1answer

It is on the internet in dozens of places

0helpful

1answer

The parts store you purchase belt from should be able to give you the routing.

1helpful

2answers

0helpful

1answer

Please follow this link to find the 2007 Buick Lucerne serpentine belt diagram: https://serpentinebelthq.com/2006-2011-buick-lucerne-v6-3-8l-serpentine-belt-diagram/

41helpful

2answers

0helpful

1answer

You will need a serpentine belt tool to do the job properly. You attach it the the belt tensioner, and pull it to loosen up the belt.